
Add to Cart
Single model 2.0mm 2 core fibre mpo mtp Cable fanout with LSZH OFNR OFNP jacket optical jumper
INTRODUCTION
MPO/MTP ribbon and trunk mulitcore cable assemblies facilitate rapid deployment of high density backbone cabling in data centers and other high fiber environment, reducing network in stallation or reconfiguration time and cost.
MTP/MPO are used to interconnect cassettes, panels, or fan outs, it offered in fiber typs in standard 8 , 12 ,24 ,or 48 cores versions using a compact and rugged microcables structre. The compact cable optimize cableway use and improve airflow.
FEATURES
1.100% pre-terminated and tested in factory to ensure transfer performance
2.Rapid configuration and networking, reduce installation time
3.Supports 40G and 100G network applications
4.Jacket material: LSZH, OFNR, OFNP available
5.Supports up to 12F, 24F, 48F, 72F, 96F, 144F, customized products are available
PRODUCT PARAMETERS
Performance Level | Standard | Elite | ||||
Connector | Mode | Endface | IL(max) (dB) | RL(min) (dB) | IL(max) (dB) | RL(min) (dB) |
MPO/MTP | SM | 12F/APC | ≤0.70 | ≥60 | ≤0.35 | ≥60 |
MPO/MTP | SM | 24F/APC | ≤0.75 | ≥60 | ≤0.35 | ≥60 |
MPO/MTP | SM | 48F/APC | ≤0.75 | ≥60 | ||
MPO/MTP | MM | 12F/PC | ≤0.50 | ≥20 | ≤0.35 | ≥20 |
MPO/MTP | MM | 24F/PC | ≤0.50 | ≥20 | ≤0.35 | ≥20 |
MPO/MTP | MM | 48F/PC | ≤0.50 | ≥20 |
Note:
1.Test wavelength:SM@1310/1550nm,MM@850/1300nm;
2.Standard conformance: GR-326,GR-1435.
Connector type
Type | Reference | Note | |
MPO | IEC 61754-7 | Single mode | APC: Green connectors (Standard ) APC: Yellow connectors (Elite) |
Multimode | PC: Aqua Connectors | ||
MTP | IEC 61754-7 | Single mode | APC: Green connectors (Standard ) APC: Yellow connectors (Elite) |
Multimode | PC: Aqua Connectors |