Shanghai Yogel Communication Equipment Co., Ltd.
Fiber Optic Products for FTTx Solutions One-stop Service Supplier
Add to Cart
OTDR2000 Optical Time Domain Reflectometer-OTDR
Fiber Network tester, Yellow, 1310/1550nm, 28/26dB
Description
OTDR2000 is the new generation of intelligent OTDR. This product is mainly used to measure the parameters of optical fibers and cables, such as length, loss, and connection quality, etc.; It can realize the accurate positioning of event points and fault points, and can be widely used in the construction, maintenance testing and emergency repair of the optical fiber communication systems as well as the research, production and production measurement of optical fibers and cables and so on. This product can provide you with the highest performance of solutions for installation and construction of fiber optic network construction and the subsequent fast and efficient maintenance and troubleshooting testing.
Features
* Novel appearance, durable
* Simplest interface and intuitive operation
* Unique dual operation mode of key plus touch screen
* One-key analysis
* High capacity of lithium battery (more than 10 hours continuous working time)
Specifications
| Model No. | OTDR2000 |
| Type of optical fiber | Single Mode |
| Center wavelength | 1310nm/1550nm ± 20nm |
| Maximum dynamic range (dB) 1 | 28/26 |
| Event blind zone 2 | 1.5m |
| Attenuation blind zone | 10m |
| Display type | 3.5inch, color LCD, touch screen operation |
| Optical interface | FC/UPC (Interchangeable SC, ST) |
| Test range (dB) | 500m,1km,2km,4km,8km,16km,32km,64km,100km |
| Pulse width | 10,30,50,100,275,500,1000,5000,10000ns |
| Range accuracy | ± (1m + sampling interval +0.005% × distance) |
| Attenuation measurement accuracy | ±0.05 dB |
| Reflection measurement accuracy | ±4dB |
| Data storage | ≥ 2000 test curves |
| Communication interface | USB |
| VFL | |
| Output power | ≥2mW |
| Test distance | ≥5 km |
| Environmental adaptability | |
| Power supply mode |
AC / DC adapter: AC: 100V ~ 240V (1.5A), 50/60Hz DC: 18V to 20V (2A) |
| Battery operation time 3 | ≥ 10hours |
| Operating temperature | -5℃～+50℃ |
| Storage temperature | -20℃～+70℃ |
| Relative humidity | 0～95％, no condensation |
| Weight | 0.90KG |
| Volume | 208mm × 110mm × 56mm |
Note
* Ambient temperature +23℃±2℃, maximum test pulse width and the average number of times more than 500;
* Test condition of blind zone (range 500m, pulse width 10ns and channel III), reflection loss of fiber end face ≥45dB, typical value;
* Low brightness, not tested.
Standard Configuration
| No. | Item | Quantity |
| 1 | OTDR | 1 pc |
| 2 | OTDR SC Interchangeable interface | 1 pc |
| 3 | Power Adapter | 1 pc |
| 4 | USB Flash Disk (Including Analysis Software) | 1 pc |
| 5 | Touch Stylus Pen | 1 pc |
| 6 | Wipers | 10 pc |
| 7 | User Manual | 1 pc |
| 8 | Calibration Report | 1 pc |
| 9 | Warranty Card | 1 pc |
| 10 | Soft carry Pack with straps | 1 pc |