Shanghai Yogel Communication Equipment Co., Ltd.
Fiber Optic Products for FTTx Solutions One-stop Service Supplier
Add to Cart
Fiber Optic to RF Converter AGC fiber optic cable tv receiver fta mini receiver with 1550 filter for CATV FTTH
1. Product Description
OR18 Series Optical receiver is a home-based optical receiver for FTTH (fiber to the home) network optical fiber access terminal, in order to achieve analog or digital signal. The machine uses low-power optical detectors, GaAs and AGC technology to meet the needs of FTTH CATV reception. A variety of functional products in the application, slightly different.
2.Advantages
♦ High-quality plastic shell, through-hole design on both sides, good heat dissipation;
♦ RF channel full GaAs low noise amplifier. Digital signal minimum to meet -18dBm receiver, analog signal minimum to meet -10dBm receiver;
♦ With AGC function (AGC range can be customized);
♦ Anti-high-frequency surge protection device GaAs amplifier tube;
♦ Low-power design, the use of high-efficiency switching power supply to ensure that the power of high reliability and high stability.
Overall power consumption is only 2W, with optical detection circuit;
♦ SC / APC & SC / PC & FC / APC & FC / PC optical connector options, male or female RF interface;
| Model | OR18A | OR18B | OR18C | OR18D |
| Wavelength | 1100~1600nm&1550nm | |||
| Input Optical Power | 0dBm~-10dBm(analog)&0dBm~-15dBm(digital) | 0dBm~-10dBm(analog)&0dBm~-18dBm(digital) | ||
| Return Loss | >45 dB | |||
| Optical Connector | FC/APC&SC/APC&FC/PC&SC/PC | |||
| RF Bandwidth | 40~1006MHz | |||
| Flatness | ±1dB@40~1006MHz | |||
| RF Output Loss | ≥16dB@ 40~550MHz ≥14dB@550~1006MHz | |||
| Output Level(single port)Pin@-15dBm | (70±1)dBuV | (67±1)dBuV | (61±1)dBuV | (82±1)dBuV |
| Output Port | 1&2(customize) | |||
| Output Impedance | 75Ω | |||
| AGC Range | 0dBm~-9dBm&-3dBm~-12dBm(customize)&-6dBm~-15dBm(customize) | |||
| C/N(Note 1) | ≥51dB | |||
| CTB(Note 1) | ≥65dB | |||
| CSO(Note 1) | ≥62dB | |||
| Equipment Volatage | DC5V±0.5 | |||
| Adapter Volatage | AC220V | |||
| Inner Feedback Volatage | DC5V±0.5 | |||
| Working Temperature | -25℃ ~+45℃ | |||
| Consumption | <2W | |||
| Size | 91×79×24mm | |||
| Carton Gross Weight | 1.20kgs(10pcs) | |||
Note 1: Under the specified link loss, 59 PAL-D analog TV channel signals are configured in 550MHz and all band digital modulated signals
are transmitted every 2MHz in 550MHz-862MHz. The digitally modulated signal level is 10dB lower than the analog modulated signal level
and the optical receiver input optical power is -1dBm. The test results will be different according to the optical receiver configuration of the different amplification module.
