Shanghai Yogel Communication Equipment Co., Ltd.
Fiber Optic Products for FTTx Solutions One-stop Service Supplier
Add to Cart
Overview
The Active Distribution Unit is an active optical device used to connect the main FTTR and the sub FTTR. It provides optical signals and power input for the sub FTTR. The products can be installed in an indoor information box or on a wall.
Features & Benefits
*Photoelectric composite interface.
*Multi-level splitting.
*Unified Puyu 2.0 appearance design.
*No need for closure opening, simplifying fiber connection and disconnection.
Structure
Specifications
Port distribution table
| POWER | Power adapter input |
| INPUT | Photoelectric input port |
| SUB | Optical cascade port |
| OUT1,OUT2,OUT3,OUT4,OUT5,OUT6,OUT7,OUT8 | Photoelectric output port |
| Dimensions (HxWxD) | 160 mm x110 mm x32mm |
| Port | XC/UPC |
Installation mode | Indoor wall-mounted,or deployed inside the information box NOTE ● Do not install the device outdoors. ● Do not install the device in an indoor environment with water intrusion risks. |
| Power supply mode | Power supply by the photoelectric composite input port |
| Rated voltage(Output) | 54-56V |
| Rated current (Output) | 2A |
| Material | PC+ASA |
| Flame spread rating | UL94-VO |
| IK impact | IK06 |
| IP rating | IP20 |
| Color | White (YB816) |
Optical Parameters
| Operation bandwidth | 1260 nm to 1550 nm | |
| Split ratio | Uneven 1:9 | |
Insertion loss | From INPUT port to OUT1/2/3/4/5/6/7/8 port | ≤16.3 dB |
| From INPUT port to SUB port | ≤2.4 dB | |
| Return loss | ≥50 dB | |
Environmental Parameters
| Working temperature | 0°C to 45°C |
| Working humidity | 5% to 95% (non-condensing) |
Adapter Performance Specifications
| Typical insertion loss | 0.5 dB |